In place of the template, I've measured the distances from the right rear corner
of the trunk.
Hole From right side From back
Jack #1 2-1/16" 1-3/8"
Jack #2 11-1/4" 6-13/16"
Jack #3 13-15/16" 1-11/16"
Handle #1 3-1/8" 5-1/16"
Handle #2 5-1/8" 3-3/8"
Handle #3 9-7/16" 5-15/16"
These measurements are as close as I can get them from Jay Peterson's template. If anybody can improve upon their accuracy by actually measuring the original holes in the car, by all means correct these values and mail it here.
Jim Pickard
B9473298 (finally with the jack and handle in place)
Back to the Classic Tiger Home Page.